Positioner
You can move the wipe pattern to any position.
Positioner off | Positioner on |
•The parameter H Position controls the horizontal position of the pattern.
A negative value moves the pattern to the left, and a positive value moves the pattern to the right.
•The parameter V Position controls the vertical position of the pattern.
A negative value moves the pattern down, and a positive value moves the pattern up.
Rotation
You can rotate the pattern. There are three rotation modes, as follows.
Angle
This carries out a wipe with the pattern in a fixed angle.
Functions
Angle off | Angle on |
The parameter Angle determines the angle of pattern rotation.
A value of −100.00 of the parameter Angle corresponds to one whole turn counterclockwise; a value of +100.00 corresponds to one whole turn clockwise.
With a value of 0.00 there is no rotation.
Wipes 51