The following sections show examples of modifying the main pattern.

Specifying the wipe direction (Direction)

You can specify the wipe direction (normal/reverse).

To specify the wipe direction in a menu

Use the following procedure.

1 In the M/E-1> Wipe menu, select HF4 ‘Edge/Direction.’

The Edge/Direction menu appears.

2 In the <Direction> group, specify the wipe direction.

Normal: regular direction

Normal/Reverse: alternate between regular and reverse for each transition

Reverse: reverse direction to normal

To specify the wipe direction with a button in the transition control block

In the transition control block of each of the M/E-1 and PGM/PST banks, press the following direction selection buttons.

NORM: Normal

NORM/REV: Normal/reverse

REV: Reverse

Splitting the wipe pattern

Use the following procedure.

1 In the M/E-1 > Wipe menu, select HF4 ‘Edge/Direction.’

The Edge/Direction menu appears.

2 Presss [Split], turning it on.

3 Set the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Split No.

Number of splits

1 to 4 (integer)

 

 

 

 

2

Spacing

Spacing between adjacent

0.00 to 100.00

 

 

patterns

 

 

 

 

 

Modifying the wipe pattern edge

Use the following procedure.

Wipes 5 Chapter

Basic Procedure for Wipe Settings

243