Wipes 5 Chapter
If you selected Pattern, you can also carry out the pattern selection by pressing the [Mix Ptn Select] button in the Matte Adjust menu, to display the Mix Ptn Select menu. Select any pattern appearing in the Mix Ptn Select menu (standard wipe patterns 1 to 24) by pressing the appropriate button, and you can then adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Pattern size | 0.00 to 100.00 |
|
|
|
|
2 | Soft | Edge softness | 0.00 to 100.00 |
|
|
|
|
5 If you selected Pattern in step 4, if required, the following modifiers can be added. After selecting a wipe mix, skip to step 6.
•When turning [Position] on and setting the pattern position
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Position H | Horizontal position | −200.00 to +200.00 a) |
2 | Position V | Vertical position | −200.00 to +200.00 a) |
a) See page 51.
•When turning [Multi] on and using replications of the same pattern
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H Multi | Number of repetitions of pattern | 1 to 63 |
|
| horizontally |
|
|
|
|
|
2 | V Multi | Number of repetitions of pattern | 1 to 63 |
|
| vertically |
|
|
|
|
|
3 | Invert Type | Replication layout | 1 to 4 a) |
a) See page 53.
•When turning [Aspect] on and setting the aspect ratio of the pattern
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Aspect | Aspect ratio | −100.00 to +100.00 a) |
a) See page 53.
•When turning [Angle] on in the <Rotation> group and slanting the pattern
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Angle | Angle of pattern rotation | −100.00 to +100.00 a) |
a) See page 51.
246 Basic Procedure for Wipe Settings