Wipes 5 Chapter
•When a diamond dust wipe is selected (pattern number 274)
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H Size | Particle width | 0.00 to 100.00 |
|
|
|
|
2 | V Size | Particle height | 0.00 to 100.00 |
|
|
|
|
3 | Flash Rate | Rate of generation of particles | 0.00 to 100.00 |
|
|
|
|
For details of a pattern mix, see the next section.
For details of applying pattern modifiers, see “Setting Wipe Modifiers” (page 242).
Pattern Mix
Combining two patterns
You can combine two selected patterns (referred to as main and “sub”) to form a new pattern. Select a main pattern in the Main Pattern menu, then use the following procedure.
1 In the
The Sub Pattern menu appears.
2 In the same way as for the main pattern, select the sub pattern.
The patterns that can be selected for the sub pattern depend on the pattern selected for the main pattern (see the following table).
Possible combinations of main pattern and sub pattern
Yes: Combination possible No: Combination not possible
Main | Sub pattern |
|
|
|
| |
pattern |
|
|
|
|
| |
Standard | Enhanced | Rotary | Mosaic | Random/ | ||
| ||||||
|
|
|
|
| diamond | |
|
|
|
|
| dust | |
|
|
|
|
|
| |
Standard | Yes | Yes | No | Yes | Yes | |
|
|
|
|
|
| |
Enhanced | Yes | Yes | No | Yes | Yes | |
|
|
|
|
|
| |
Rotary | No | No | No | No | No | |
|
|
|
|
|
| |
Mosaic | Yes | Yes | No | No | Yes | |
|
|
|
|
|
| |
Random/ | Yes | Yes | No | Yes | No | |
diamond |
|
|
|
|
| |
dust |
|
|
|
|
| |
|
|
|
|
|
|
240 Basic Procedure for Wipe Settings