3 In the
The Pattern Mix menu appears.
4 In the <Pattern Mix> group, select the type of pattern mix.
Mix: mix
+Nam: positive Nam
Morphing: morphing
For an overview of types of pattern mix, see page 47.
5 Depending on the selection in step 4, set the following parameters.
• When mix, positive Nam, or negative Nam is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Mix Ratio | Proportion of sub pattern to the | 0.00 to 100.00 |
|
| main pattern |
|
|
|
|
|
•When morphing (see page 47) is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
2 | Start | Point in transition at which main | −50.00 to +150.00 |
|
| pattern is at 100% |
|
|
|
|
|
3 | End | Point in transition at which sub | −50.00 to +150.00 |
|
| pattern is at 100% |
|
|
|
|
|
6 In the <Main/Sub Link> group, make the main/sub modifier link function settings. (See “Main and sub modifier link function” (page 49).)
Full: full link mode
Semi:
Applying the effect of a diamond dust wipe to the selected pattern (Dust mix)
Use the following procedure.
1 In the Pattern Mix menu, press [Dust Mix], turning it on.
2 Set the following parameters as required.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Mix Ratio | Proportion of diamond dust | 0.00 to 100.00 |
|
| pattern in mix |
|
|
|
|
|
2 | H Size | Particle width | 0.00 to 100.00 |
|
|
|
|
Wipes 5 Chapter
Basic Procedure for Wipe Settings | 241 |
|
|