Panel Control and Menus 2 Chapter

M/E 1 and P/P: Select the corresponding regions, M/E-1 and PGM/PST.

USER 1 and USER 2: Select the corresponding USER regions.

DME1 to DME4: Select a DME channel.

P-BUS:Select the P-BUS region.

GPI:

cFunction selection buttons

UNDO: After recalling a register, press this button to return to the state before recalling the register.

STORE STATS (store status): This lights amber when data is stored in a register. After saving data to a register, hold down this button and press the [UNDO] button to return the register to the state before the data was saved.

STORE: Press this button to switch to the mode for saving a snapshot or effect in a register.

RCALL (recall): Press this button to switch to the mode for recalling a snapshot, effect, or shot box from a register.

dNumeric keypad

In addition to the buttons for numeric input, this includes buttons for adding attributes to snapshots.

0 to 9: Used to input numeric digits.

. (period): Enters the decimal point. When the [TRANS RATE] button is lit, enters “00.” When the [EFF] button or [SNAP SHOT] button is lit, this is used to find an empty register.

+/–/ EFF DISS (effect dissolve): Invert the sign, negative or positive.

When the [SNAP SHOT] button is lit, applies the effect dissolve attribute to a snapshot.

CLR/AUTO TRANS (clear/auto transition): Clear an input value, returning to the previous state.

When the [SNAP SHOT] button is lit,

applies the auto transition attribute to a snapshot.

TRIM/GPI ENBL (enable): After entering a difference value to be added to an existing setting, press this button to confirm the change.

ENTER: Confirm an entered value.

eDisplay

This shows the selected region name and entered numeric values.

156 Names and Functions of Parts of the Control Panel