When the pattern limit function is enabled, carrying out a transition results in the following effect for example settings.
•When the limit value is set to 50%, the effect at the end of the transition is the same as when the fader lever is at the center position in the normal case (with the pattern limit function disabled); the wipe pattern does not complete.
•When the limit value is set to 0%, the wipe effect is completely disabled, and carrying out the transition produces no change in the image.
•When the limit value is set to the maximum 100%, the image changes in exactly the same way as when the pattern limit function is off, but when the transition is completed, the
B buses do not interchange.
You can specify the limit value either by entering a numeric value in the menu, or by operating the fader lever to set the fader lever position. (See “Pattern Limit” (page 189).)
Note
The pattern limit function is not available in an independent key transition.
Functions
Transitions 35