2 In the <Pairing> group, select the slit direction.
H:Create slits in the horizontal direction.
V:Create slits in the vertical direction.
3 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Width of the slits | 1 to 128 (integer) |
|
|
|
|
2 | H Offset | Spacing in the horizontal direction | −100.00 to +100.00 a) |
3 | V Offset | Spacing in the vertical direction | −100.00 to +100.00 a) |
a) See page 54.
Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern. Use the following procedure.
1 In the
The Main Modify menu appears.
2 Depending on the desired effect, in the <Modulation> group select one of the following.
H:Modulate the pattern, applying waviness in the horizontal direction to edges.
V:Modulate the pattern, applying waviness in the vertical direction to edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to edges.
3 Set the following parameters.
.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Amplitude | Amplitude of modulation | 0.00 to 100.00 |
|
|
|
|
2 | Frequency | Frequency of modulation | 0.00 to 100.00 |
|
|
|
|
3 | Speed | Speed of waves | −100.00 to +100.00 a) |
4 | Shape | Form of the modulation | 1 to 3 b) |
a)See page 55.
b)See page 55.
Wipes 5 Chapter
Basic Procedure for Wipe Settings | 251 |
|
|