Symbol Technologies WS 2000 manual Changing the Name of the Switch

	System Administration
Location	Description
Lower LED	This LED is only present on Ports 1-4. These ports provide 802.3af
	Power over Ethernet (PoE) support to devices (such as Access
	Ports). The LED has several states:
	! OFF — A non-power device (or no device) is connected; no
	power is being delivered
	! GREEN — The switch is delivering 48 volts to the power device
	connected to that port.
	! RED — There was a valid PoE connection; however, the switch
	has detected that the power device is faulty. The red light will
	remain until a non-faulty connection is made to the port

Changing the Name of the Switch

When the administrator first logs into the WS 2000 Network Management System, the System Settings screen appears. One of the fields in this screen is the System Name field. In this field, the administrator can specify the name of the switch. This name is used to distinguish the switch from others that are on the network and it is also used to set the device name in SNMP.

To examine and change the current name for the switch:

1.Select System Configuration -->System Settings from the left menu.

2.Find the System Name field and type a string of alphanumeric characters to create a name.

3.Select the Apply button to save the change.

Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved	62
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004