Symbol Technologies WS 2000 manual General Access Port Information

System Administration

There are four areas on the screen. The Information area shows general information about the Access Port. The Received and Transmitted areas of the screen display statistics for the cumulative packets, bytes, and errors received and transmitted through the Access Port. The Associated Mobile Units section lists the MUs and provides information on specific MUs that are currently transmitting through the Access Port.

General Access Port Information

Information	Description
Field
Location	The site location of the Access Port (an optional field that the
	administrator fills in on the Wireless --> Access Ports --> <Access
	Port Name> screen).
HW Address	The Media Access Control (MAC) address of the Access Port. This
	value is typically set at the factory and can be found on the bottom of
	the Access Port.
Adopted by	The WLANs that currently adopt this access port (see Network
	Configuration --> Wireless for the Access Port Adoption List)
Channel	This field indicates the channel for communications between the
	Access Port and mobile units. To specify the value, go to the
	corresponding Access Port screen.
Power	The power level in milliwatts (mW) for RF signal strength is specified
	on the corresponding Access Port screen.

Click on the Clear all AP Stats button to clear all the statistics for the selected Access Port.

Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved	78
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004