Received Field Description | Symbol Technologies WS 2000 instruction

System Administration

The Information portion of the Subnet Stats screen displays general information about the subnet.

•The HW address is the Media Access Control (MAC) address of the switch’s WAN port, which is set at the factory.

•The IP addresses displayed here for the subnet connection are set on the subnet screen (Network Configuration --> WLAN --> <subnet name> ).

The Received and Transmitted portions of the screen display statistics for the cumulative packets, bytes, and errors received and transmitted through the WAN interface since the WAN was last enabled or the switch was last rebooted.

	Received Field	Description
	RX Packets	The total number of data packets received over the subnet

	RX Bytes	The total number of bytes of information received over the subnet

	RX Errors	The total number of errors including dropped data packets, buffer
	RX Errors	overruns, and frame errors on inbound traffic
		overruns, and frame errors on inbound traffic
	RX Dropped	The number of data packets that failed to reach the subnet

	RX Overruns	The total number of buffer overruns (when packets are received faster
	RX Overruns	than the subnet can handle them)
		than the subnet can handle them)
	RX Frame	The total number of TCP/IP data frame errors received


	Transmitted	Description
	Field	Description
	Field
	TX Packets	The total number of data packets sent over the subnet

	TX Bytes	The total number of bytes of information sent over the subnet

Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved	81
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004

Image 81

Symbol Technologies WS 2000 manual Received Field Description, Transmitted Description Field

Contents

WS 2000 Wireless Switch Version System Reference72E-67701-01 Rev a March Patents Copyright Table of Contents Chapter Advanced Configuration Chapter Field Office Example 111 WS 2000 Wireless Switch System Reference Guide About this DocumentDocument Conventions Wireless LAN Wlan Security Management of Access PortsSystem Overview Firewall Security Technical Specifications Physical SpecificationsHardware Overview Cell Controller Services Operating System OS ServicesPower Specifications Environmental Specifications Gateway Services 802.11b Support 802.11a Support Access Ports Gateway Services WS 2000 Wireless Switch FirewallNetwork Address Translation NAT Snmp Management Support Layer 3 RoutingDhcp Client and Server Overview 802.1x with Radius Authentication WEP 64 40-bit keyWEP 128 104-bit Key Kerberos Authentication 802.1x with Shared Key Authentication KeyGuard-MCM Support Wireless Protected Access WPA Installing the Switch Set up Communication to the SwitchGetting Started Overview Getting Started Overview Changing the Administrator Password Configuring the Switch Configure the LAN Interface Field Description Defining the Subnets Interfaces Configure Subnets Dhcp Configuration Advanced Dhcp Settings Communicating with the Outside World Configure the WAN Interface Setting Up Point-to-Point over Ethernet PPPoE Communication Chap Enable Wireless LANs WLANs Wireless Summary Area Access Port Adoption Configure WLANs Configure Wlan Security Field Description NameSubnet 802.1x EAP Authentication Setting the Authentication Method Setting the Encryption Method Kerberos AuthenticationConfiguring WEP Encryption Configuring WPA-TKIP Configure Wlan Security No Encryption KeyGuard-MCM Mobile Unit Access Control List ACL Configure Access Ports Configure Access Ports Name Configure Subnet Access Access Exception Area Access Overview TableColor Access Type Description Green Yellow Http Protocol Transport Description Port Used ALL Transport Description WLAN-How to Configure Advanced Settings Advanced Configuration WLAN-Setting Default Access Port Settings WLAN-Setting Default Access Port Settings Dtim Period Beacon Interval WLAN-Advanced Access Port Settings Primary WlanSecurity Beacon WLAN-Advanced Access Port Settings Beacon is a packet broadcast by the adopted access ports to Gateway-How to Configure Network Address Translation NAT Gateway-How to Configure Network Address Translation NAT Always On Firewall Filters Gateway-How to Configure the WS 2000 Firewall Configurable Firewall Filters Mime Flood Attack Check Gateway-How to Configure Static Routes Defining Routes Setting the RIP ConfigurationNo RIP RIP RIP v2 Security-How to Configure 802.1x EAP AuthenticationCompat None Security-How to Configure 802.1x EAP Authentication Security-How to Configure 802.1x EAP Authentication Security-How to Configure Kerberos Authentication Security-How to Specify a Network Time Protocol NTP Server WS 2000 Wireless Switch LED Functions Switch SettingsOverview Location Description Changing the Name of the Switch Location field Change the Location and Country Settings of the WS Updating the WS 2000 Wireless Switch’s Firmware How to Restart the WS 2000 Wireless Switch Performing the Firmware Update Checking for and Downloading Firmware updates Exporting and Importing Wireless Switch Settings System Configuration To Import or Export Settings to an FTP Site To Import Settings to a Local FileTo Export Settings to a Local File How to Restore Default Configuration Settings Property Value How to Configure Snmp Traps Remote AdministrationSetting the Snmp Version Configuration Setting Up Snmp v1/v2c Community Definitions NoAuth Setting Up Snmp v3 Community DefinitionsAuthNoPriv AuthPriv Setting the Trap Configuration Setting Up the Access Control List Configuration AuthenticationTrap Trap Name Generates a Trap when… Category Cold Start Setting the Trap Configuration for Snmp v1/v2c Setting the Trap Configuration for Snmp Configure Administrator Access Access Port Description Configure Management Access Setup AirBEAM Software Access Access Port StatisticsChanging the Administrator and Manager Passwords Statistics and Logs General Access Port Information Associated Mobile Units Received and Transmitted Tables Subnet Statistics Transmitted Description Field Received Field Description Interfaces WAN Statistics Received Field Description Viewing the Log on the Switch Setting Up and Viewing the System Log Setting Up a Log Server Background Retail Use Cases Plan Contacting the Wireless Switch Configuring the System Settings Entering the Basic System Settings Setting Access Control Configuring the Subnets IP Address PlanSubnet IP Address Range For each subnet Configuring POS Subnet Configuring the Printer Subnet Retail Use Cases Configuring the Cafe Subnet Retail Use Cases Configuring the WAN Interface Configuring Network Address Translation NAT Retail Use Cases Setting Access Port Defaults Configuring the Access PortsSwitch Port Connected to Inspecting the Firewall Naming the POS Access Port Configuring the Printer Access Port Configuring the Cafe Access Port Associating the Access Ports to the WLANs Configuring the Cafe Wlan Configuring the WLANs Name Printer Configuring the Printer Wlan For the POS WLAN, she makes the following choices Configuring the POS Wlan Setting Subnet Access Retail Use Cases Configuring the Clients Testing ConnectionsWireless Authentication Encryption Channel Client IP Address Subnet Mask Gateway Port Field Office Example Plan Configuring the System Settings Entering the Basic System Settings Setting Access Control Field Office Example Configuring the Engineering LAN Configuring the LAN Field Office Example Field Office Example Configuring the Sales Subnet Configuring the WAN Field Office Example Setting Up Network Address Translation Field Office Example Adopting Access Ports Confirm Firewall ConfigurationMAC Address Location Adoption List Label Field Office Example Configuring the WLANs Security Field Office Example Wlan Field Office Example Field Office Example Field Office Example Access Port Channel Configuring Subnet Access Installing the Access Ports and Testing Appendix A. Sample Configuration File NTP menu Wlan 1 configuration set mode 1 enable Wlan 3 configuration set mode 3 disable Default 802.11 a radio configuration set reg a in/out 149 Access Port configuration LAN Dhcp configuration network Firewall configuration set syn enable Outbound 1-To-Many NAT configuration set outb map s1 Page Index FTP Snmp 802.1x EAP authentication