Symbol Technologies WS 2000 manual Configuring Network Address Translation NAT

Retail Use Cases

If corporate had not paid their ISP for a static IP address for each store, she would have selected the This interface is a DHCP Client option and the WAN configuration information would have been assigned by the ISP each time they connected to the Internet.

Clarisa clicks the Apply button to save her changes.

Configuring Network Address Translation (NAT)

Clarisa has only one public IP address for the whole store. She will use network address translation to make all request from the internal IP addresses to appear as if they came from the single public IP address.

She selects the NAT node under the WAN item in the left menu. The screen shows all IP addresses assigned to the switch in the WAN interface configuration step. In this case, there is one IP address shown. She selects 1 to Many from the NAT Type menu to the right of the IP address.

Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved	98
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004