Symbol Technologies WS 2000 manual WLAN-Advanced Access Port Settings

	WLAN—Advanced Access Port Settings
Primary WLAN	Set the Primary WLAN field when the 802.11a broadcast
	protocol is used. When a WLAN is associated with a
	801.11a broadcaster only one ESSID can be broadcast from
	the Access Port (even though three are supported by the
	switch) . This field specifies which ESSID to broadcast.
Security Beacon	Select the Security Beacon checkbox if the WLAN
	associated with the Access Port needs to be secure. If this
	feature is selected, the WLAN will not broadcast the ESSID.
	This selection eliminates the possibility of hackers tapping in
	to the WLAN without authorization by “stealing” the ESSID.

9.Click OK when finished setting the beacon settings.

10.Click the Apply button to save changes

WLAN—Advanced Access Port Settings

The WS 2000 Wireless Switch GUI allows the administrator to configure the Access Port settings. To examine or change that information:

1.Select Network Configuration --> Wireless --> Access Ports from the left menu and then click the + to the left of the menu item. The detected Access Ports will be listed under the menu item.

2.Select the Access Port to examine or modify.

When the Access Port Name menu item is selected, the following screen will appear:

Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved	47
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004