System Administration
Configure Management Access
The WS 2000 Network Management System runs from a standard Web browser. Any individual on an enabled subnet or over the WAN can access the log screen by specifying one of the IP addresses associated with the user interface. The WS 2000 Access screen allows the administrator to restrict access from different locations. By selecting the appropriate checkboxes, the administrator can allow or disallow specific types of access from the WAN port or from the LAN subnets.
Choose the types of access to allow by checking the associated checkbox.
Access | Port | Description |
Applet | 80 | Allows access to the WS 2000 Management System through a |
HTTP |
| standard http web browser communication. |
Applet | 443 | Allows access to the WS 2000 Management System through a |
HTTP |
| https (secure) connection from a web browser. |
CLI | 23 | Allows administration access to the wireless switch through |
TELNET |
| TELNET. Allows the user to access the switch through the |
|
| command line interface. |
SNMP | 161 | Allows administration access for an SNMP server. |
|
|
|
Note: If all the checkboxes in this section are disabled, the administrator will not be able to access the switch through the WS2000 Management System user interface. The only access available is through a direct serial cable connection from a PC. All commands are given using the command line interface. If this situation occurs accidentally, you can restore the switch’s factory settings using the command line interface.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved | 76 |
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004 |
|
