Caring for Your Printer 4
8.Install the paper tray.
9.Press the CLEAN PRINT HEAD button.
After you press the button, the printer feeds the 10 sheets of paper through the printer so that the fuser cleaning pad cleans the fuser roller.
10.Remove the paper tray.
11.Remove the fuser cleaning pad.
12.Install a new fuser wiper.
13.Load another 10 sheets of standard office Bond paper (laser printer or photocopy paper) into the paper tray. Be sure to load the paper so that the long side of the paper enters the printer first, as shown on page
14.Install the paper tray.
15.Press the CLEAN PRINT HEAD button.
After you press the button, the printer feeds the 10 sheets of paper through the printer.
If any ink is visible on the paper, repeat Steps 13, 14, and 15.
16.Return to normal operation by pressing the TEST PRINT button to reach this display:
Utilities Vx.xx
Exit Next
17.Press the CLEAN PRINT HEAD button to exit Utilities mode.
User Manual |
