Tektronix Phaser 300X user manual Loading paper

2Getting Set Up

Loading paper

1.Move the guides.

2.Push down on the metal lift plate with your finger; then slide the paper under the tabs. When you use A-size (8.5 x 11 in.) or A4-size (210 x 297 mm) paper, place the long side of the paper under the tabs, making sure that the paper fits snugly against the inside front wall of the paper tray.

3.Adjust the rear guide until it touches the rear of the paper.

Note The rear guide must fit snugly against the paper; otherwise the printed image might be clipped or rotated.

4.Put the cover on the paper tray.

1	2
3	4
	5
	8873-03

5.Insert the paper tray into the printer. Tilt the paper tray up slightly as you insert it.

Note To load transparencies, refer to “Making transparencies” on page 3-36.

2-4 Phaser 300X Color Printer