Getting Set Up 2

Connecting the printer

Printer ports

The printer accepts data through four ports:

1.LocalTalk

2.Serial (RS-232)

3.Parallel

4.Ethernet

The printer accepts data from all the ports at the same time. The printer accepts print jobs on a first-come, first-served basis.

1

2

3

5

4

PXi

8873-05

The SCSI port (5) is for connecting an external hard disk only. You cannot connect a computer to this port or send print data through the SCSI interface. Refer to “Adding a hard disk for font storage” on page B-5 for more information on the SCSI port.

Note See “Interface cables and Ethernet adapters” on page 5-4 about ordering cables and adapters for connecting the printer.

User Manual

2-7

Page 21
Image 21
Tektronix Phaser 300X user manual Connecting the printer, Printer ports