www.ti.com
MDIO Registers
4.11 MDIO User Command Complete Interrupt Mask Clear Register (USERINTMASKCLEAR)
The MDIO user command complete interrupt mask clear register (USERINTMASKCLEAR) is shown in Figure 25 and described in Table 24.
Figure 25. MDIO User Command Complete Interrupt Mask Clear Register (USERINTMASKCLEAR)
31 |
|
| 16 |
Reserved |
|
|
|
|
|
| |
15 | 2 | 1 | 0 |
Reserved |
| USERINTMASK | |
|
|
| CLEAR |
|
LEGEND: R = Read only; R/WC = Read/Write 1 to clear;
Table 24. MDIO User Command Complete Interrupt Mask Clear Register (USERINTMASKCLEAR)
Field Descriptions
Bit | Field | Value | Description |
| Reserved | 0 | Reserved |
USERINTMASK |
| MDIO user command complete interrupt mask clear for USERINTMASKED[1:0] respectively. | |
| CLEAR |
| Setting a bit to 1 will disable further user command complete interrupts for that particular |
|
|
| USERACCESS register. Writing a 0 to this register has no effect. |
76 | Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) | SPRU975B |