www.ti.com
MDIO Registers
4.9MDIO User Command Complete Interrupt (Masked) Register (USERINTMASKED)
The MDIO user command complete interrupt (Masked) register (USERINTMASKED) is shown in Figure 23 and described in Table 22.
Figure 23. MDIO User Command Complete Interrupt (Masked) Register (USERINTMASKED)
31 |
|
| 16 |
Reserved |
|
|
|
|
|
| |
15 | 2 | 1 | 0 |
Reserved |
| USERINT | |
|
| MASKED | |
|
LEGEND: R = Read only; R/WC = Read/Write 1 to clear;
Table 22. MDIO User Command Complete Interrupt (Masked) Register (USERINTMASKED) Field
Descriptions
Bit | Field | Value | Description |
| Reserved | 0 | Reserved |
USERINTMASKED |
| Masked value of MDIO User command complete interrupt. When asserted, a bit indicates that | |
|
|
| the previously scheduled PHY read or write command using that particular USERACCESS |
|
|
| register has completed and the corresponding USERINTMASKSET bit is set to 1. Writing a 1 |
|
|
| will clear the interrupt and writing 0 has no effect. |
74 | Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) | SPRU975B |