www.ti.com
MDIO Registers
4.10 MDIO User Command Complete Interrupt Mask Set Register (USERINTMASKSET)
The MDIO user command complete interrupt mask set register (USERINTMASKSET) is shown in Figure 24 and described in Table 23.
Figure 24. MDIO User Command Complete Interrupt Mask Set Register (USERINTMASKSET)
31 |
|
| 16 |
Reserved |
|
|
|
|
|
| |
15 | 2 | 1 | 0 |
Reserved |
| USERINT | |
|
| MASKSET | |
|
LEGEND: R = Read only; R/WC = Read/Write 1 to clear;
Table 23. MDIO User Command Complete Interrupt Mask Set Register (USERINTMASKSET) Field
Descriptions
Bit | Field | Value | Description |
| Reserved | 0 | Reserved |
USERINTMASKSET |
| MDIO user interrupt mask set for USERINTMASKED[1:0] respectively. Setting a bit to 1 will | |
|
|
| enable MDIO user command complete interrupts for that particular USERACCESS register. |
|
|
| MDIO user interrupt for a particular USERACCESS register is disabled if the corresponding bit |
|
|
| is 0. Writing a 0 to this register has no effect. |
SPRU975B | Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) | 75 |
Submit Documentation Feedback |
|
|