Xantrex Technology XG 850 manual 1Basic Setup Procedure, Step Description Action Reference

Installation

Basic Setup Procedure

Table 2-1 provides a summary of the basic setup procedure with references to the relevant sections in this chapter. Refer to this table if you are unfamiliar with the installation requirements for the power supply. Complete each step in the sequence given.

Table 2-1Basic Setup Procedure

Step	Description	Action	Reference
1	Inspect	Inspect the power supply.	“Step 1: Inspecting and Cleaning”
			on page 2–3.
2	Install	Install the power supply	“Step 2: Location and Mounting” on
		(benchtop or rack mount).	page 2–4.
		Ensure adequate ventilation.
3	Connect Input	Connect AC input power.	“Step 3: Connecting AC Input
	Power		Power” on page 2–5.
4	Select Wires	Select wires that are correctly	“Step 4: Selecting Load Wires” on
		rated for the maximum DC	page 2–6.
		output current.
5	Test	Perform functional tests for	“Step 5: Performing Functional
		voltage mode operation, current	Tests” on page 2–8.
		mode operation, and front panel
		controls.
6	Connect Loads	Connect the load wires to the	“Step 6: Connecting Loads” on
		DC output.	page 2–10.
7	Connect Remote	Connect remote sensing	“Step 7: Connecting Remote
	Sensing (if	connectors on power supply to	Sensing” on page 2–13.
	required)	load.

2-2 M370078-01