Xantrex Technology XG 850 Resetting the Power Supply, To perform a soft reset, Parameter Setting

Resetting the Power Supply

Resetting the Power Supply

	The reset is used to clear the parameters to the factory default values.
Soft Reset	The soft reset is used to set the parameters (see Table 3-9) to the default
	values, but it does not reset the calibration constants
	To perform a soft reset:
	1. Turn the power supply to Off then On.
	When the unit is powering on, 8888 8888 is displayed on the output
	voltage and current displays.
	2. Press the key combination of both OUTPUT ENABLE Main button
	and OUTPUT ENABLE Aux button and hold continuously for 3
	seconds in order to execute.	3
	If the flash fail alarm triggers, it is also possible to reset the power
	supply.

3. Once a reset has been triggered, the output voltage display shows P5U CLr for 1 second.

The model number will be displayed for 1 second and then return to normal mode.

After executing a reset, the power supply’s settings are restored to the default settings but retain the calibration data. Table 3-9 lists the default settings.

Table 3-9Power Supply Default Settings

Parameter	Setting
Address	1
Data rate (Kbps)	9.6
Communication mode	RS-232
Vout setting	0 V
Iout setting	0 A
Output	Off
AUX Out	Off
Trigger	Off
Ext. On/Off Polarity	Negative
Auto start mode	Off
AUX Auto start mode	Off
OVP	Maximum

M370078-01 3-39