Xantrex Technology XG 850 manual Inspecting and Cleaning, Initial Inspection, Periodic Cleaning

Step 1: Inspecting and Cleaning

Step 1: Inspecting and Cleaning

Initial Inspection

When you first receive your unit, perform a physical check:

1.Inspect the unit for any scratches and cracks, broken switches, connectors or displays.

2.	Ensure that the packing box contains the 7.5 foot (2.5 m) power cord.	2
3.	If you see external damage or suspect internal damage, contact
	Xantrex Customer Service (see Contact Information on page iii) for
	an assessment. If the unit is damaged, save all packing materials and

notify Xantrex Customer Service immediately. See packing instructions in “Return Procedure” on page WA–4.

Periodic Cleaning

The power supply only requires periodic cleaning, not routine servicing. Whenever a unit is removed from operation, clean the metal surfaces with naptha or an equivalent solvent, and clean the front panel with a weak solution of soap and water. Use low-pressure compressed air to blow dust from components on the printed circuit boards.

M370078-01 2-3