Chapter 4 Wizard Setup

Figure 41 VPN Advanced Wizard: Step 5

The following table describes the labels in this screen.

Table 21 VPN Advanced Wizard: Step 5

LABEL

DESCRIPTION

Summary

 

 

 

Name

This is the name of the VPN connection (and VPN gateway).

 

 

Secure

This is the WAN IP address or domain name of the remote IPSec router. If this field

Gateway

displays 0.0.0.0, only the remote IPSec router can initiate the VPN connection.

 

 

Pre-Shared

This is a pre-shared key identifying a communicating party during a phase 1 IKE

Key

negotiation.

 

 

Local Policy

This is a (static) IP address and Subnet Mask on the LAN behind your ZyWALL.

 

 

Remote

This is a (static) IP address and Subnet Mask on the network behind the remote

Policy

IPSec router.

 

 

Remote

These commands set the matching VPN connection settings for the remote gateway.

Gateway CLI

If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into

 

its command line interface in order to configure it for the VPN tunnel.

 

You can also use a text editor to save these commands as a shell script file with a

 

“.zysh” filename extension. Then you can use the file manager to run the script in

 

order to configure the VPN connection.

 

See the commands reference guide for details on the commands displayed in this

 

list.

 

 

Save

Click Save to store the VPN settings on your ZyWALL.

 

 

4.8.8 VPN Advanced Wizard - Summary

This summary of VPN tunnel settings is read-only.

Name: Identifies the VPN connection (and the VPN gateway).

108

 

ZyWALL USG 1000 User’s Guide