ZyXEL Communications ZyWALL 1000 10.6.3PPPoE/PPTP Interface Summary

Chapter 10 Interface

10.6.3PPPoE/PPTP Interface Summary

"You have to set up an ISP account before you create a PPPoE/PPTP interface.

This screen lists every PPPoE/PPTP interface. To access this screen, click Network > Interface > PPPoE/PPTP.

Figure 139 Network > Interface > PPPoE/PPTP

Each field is described in the table below.

Table 59 Network > Interface > PPPoE/PPTP

LABEL	DESCRIPTION
#	This field is a sequential value, and it is not associated with any interface.

Name	This field displays the name of the interface.

Base Interface	This field displays the interface on the top of which the PPPoE/PPTP interface
	is.

Account Profile	This field displays the ISP account used by this PPPoE/PPTP interface.

Add icon	This column lets you create, edit, remove, activate, deactivate, connect and
	disconnect interfaces.
	To create an interface, click the Add icon at the top of the column. The PPPoE/
	PPTP Interface Add/Edit screen appears.
	To edit an interface, click the Edit icon next to it. The PPPoE/PPTP Interface
	Add/Edit screen appears.
	To remove an interface, click the Remove icon next to it. The ZyWALL confirms
	you want to remove it before doing so.
	To activate or deactivate an interface, click the Active icon next to it. Make sure
	you click Apply to save and apply the change.
	To connect or disconnect an interface, click the Connect icon next to it. You
	might use this icon to test the interface or to manually establish the connection
	for a Dial-on-DemandPPPoE/PPTP interface.

Apply	Click Apply to save your changes back to the ZyWALL.

Reset	Click Reset to begin configuring this screen afresh.