ZyXEL Communications ZyWALL 1000 35.3.2 Address Group Add/Edit

Chapter 35 Addresses

The following table describes the labels in this screen. See Section 35.3.2 on page 518 for more information as well.

Table 167 Object > Address > Address Group

LABEL	DESCRIPTION
#	This field is a sequential value, and it is not associated with a specific address
	group.
Name	This field displays the name of each address group.
Description	This field displays the description of each address group, if any.
Add icon	This column provides icons to add, edit, and remove address groups.
	To add an address group, click the Add icon at the top of the column. The Address
	Group Add/Edit screen appears.
	To edit an address group, click the Edit icon next to the address group. The
	Address Group Add/Edit screen appears.
	To delete an address group, click on the Remove icon next to the address group.
	The web configurator confirms that you want to delete the address group.

35.3.2 Address Group Add/Edit

The Address Group Add/Edit screen allows you to create a new address group or edit an existing one. To access this screen, go to the Address Group screen (see Section 35.3.1 on page 517), and click either the Add icon or an Edit icon.

Figure 381 Object > Address > Address Group > Add

The following table describes the labels in this screen.

Table 168 Object > Address > Address Group > Add

LABEL	DESCRIPTION
Name	Enter a name for the address group. You may use 1-31 alphanumeric characters,
	underscores(_), or dashes (-), but the first character cannot be a number. This
	value is case-sensitive.
Description	This field displays the description of each address group, if any. You can use up to
	60 characters, punctuation marks, and spaces.

518
	ZyWALL USG 1000 User’s Guide