ZyXEL Communications ZyWALL 1000 43.4Console Port Speed

Chapter 43 System

Figure 418 Synchronization in Process

The Current Time and Current Date fields will display the appropriate settings if the synchronization is successful.

If the synchronization was not successful, a log displays in the View Log screen. Try reconfiguring the Date/Time screen.

To manually set the ZyWALL date and time.

1Click System > Date/Time.

2Select Manual under Time and Date Setup.

3Enter the ZyWALL’s time in the New Time field.

4Enter the ZyWALL’s date in the New Date field.

5Under Time Zone Setup, select your Time Zone from the list.

6As an option you can select the Enable Daylight Saving check box to adjust the ZyWALL clock for daylight savings.

7Click Apply.

To get the ZyWALL date and time from a time server

1Click System > Date/Time.

2Select Get from Time Server under Time and Date Setup.

3Under Time Zone Setup, select your Time Zone from the list.

4As an option you can select the Enable Daylight Saving check box to adjust the ZyWALL clock for daylight savings.

5Under Time and Date Setup, enter a Time Server Address (Table 198 on page 578).

6Click Apply.

43.4Console Port Speed

This section shows you how to set the console port speed when you connect to the ZyWALL via the console port using a terminal emulation program. See Table 2 on page 55 for default console port settings.

Click System > Console Speed to open the Console Speed screen.

	579
ZyWALL USG 1000 User’s Guide