Appendix B Log Descriptions

Table 254 Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

%s MTU > (%s MTU - 8),

An administrator configured a PPP interface, PPP interface MTU >

%s may not work

(base interface MTU - 8), PPP interface may not run correctly because

correctly.

PPP packets will be fragmented by base interface ans peer will not

 

receive correct PPP packets. 1st %s: PPP interface name, 2nd %s:

 

ethernet interface name.

 

 

(%s MTU - 8) < %s MTU,

An administrator configured ethernet, vlan or bridge and this interface

%s may not work

is base interface of PPP interface. PPP interface MTU > (base

correctly.

interface MTU - 8), PPP interface may not run correctly because PPP

 

packets will be fragmented by base interface and peer will not receive

 

correct PPP packets.1st %s: Ethernet interface name, 2nd %s: PPP

 

interface name.

 

 

Interface %s links

An administrator set a static gateway in interface but this interface is

down. Default route

link down. At this time the configuration will be saved but route will not

will not apply until

take effect until the link becomes up.1st %s: interface name, 2nd %s:

interface %s links up.

interface name.

name=%s,status=%s,TxP

Port statistics log. This log will be sent to the VRPT server.

kts=%u,

1st %s: physical port name, 2nd %s: physical port status, 1st %u:

RxPkts=%u,Colli.=%u,T

physical port Tx packets, 2nd %u: physical port Rx packets, 3rd %u:

xB/s=%u,

physical port packets collisions, 4th %u: physical port Tx Bytes/s, 5th

RxB/s=%u,UpTime=%s

%u: physical port Rx Bytes/s, 3rd %s: physical port up time.

name=%s,status=%s,TxP

Interface statistics log. This log will be sent to the VRPT server.

kts=%u,

1st %s: interface name, 2nd %s: interface status, 1st %u variable:

RxPkts=%u,Colli.=%u,T

interface Tx packets, 2nd %u variable: interface Rx packets, 3rd %u:

xB/s=%u,

interface packets collisions, 4th %u: interface Tx Bytes/s, 5th %u:

RxB/s=%u

interface Rx Bytes/s.

Interface %s start

A PPP or aux interface started dialing to a server. %s: interface name.

dailing.

 

Interface %s connect

A PPTP interface failed to connect to the PPTP server. %s: interface

failed: Connect to

name.

server failed.

 

Interface %s

A PPP or AUX connection will terminate. %s: interface name.

connection

 

terminated.

 

Interface %s

An idle PPP or AUX connection timed out.1%s: interface name.

connection

 

terminated: idle

 

timeout.

 

Interface %s connect

MS-CHAPv2 authentication failed (the server must support mS-

failed: MS-CHAPv2

CHAPv2 and verify that the authentication failed, this does not include

mutual authentication

cases where the servers does not support MS-CHAPv2). %s: interface

failed.

name.

 

Interface %s connect

MS-CHAP authentication failed (the server must support MS-CHAP

failed: MS-CHAP

and verify that the authentication failed, this does not include cases

authentication

where the server does not support MS-CHAP). %s: interface name.

failed.

 

Interface %s connect

CHAP authentication failed (the server must support CHAP and verify

failed: CHAP

that the authentication failed, this does not include cases where the

authentication

server does not support CHAP). CHAP: interface name.

failed.

 

Interface %s is

A PPP or AUX interface connected successfully. %s: interface name.

connected.

 

700

 

ZyWALL USG 1000 User’s Guide