Chapter 6 Tutorials

6.3.7 Synchronize the Backup

1Connect the backup to the same network as the master.

2Click Device HA > Synchronize.

3Type the password for synchronization in the Password field. Enter the IP address of the master (on a secure network), and click Sync Now to get the configuration from the master.

Figure 73 Device HA > Synchronize

You can also set up the backup to synchronize with the master at regular intervals.

6.4 User-Aware Access Control

You can configure many policies and security settings for specific users or groups of users. This is illustrated in the following example, where you will set up the following policies. This is a simple example that does not include priorities for different types of traffic. See Section

27.4on page 380 for more on bandwidth management.

Table 33 User-Aware Access Control Example

GROUP (USER)

WEB SURFING

WEB

MSN

LAN-TO-DMZ

BANDWIDTH

ACCESS

Finance (Leo)

Yes

200K

No

Yes

 

 

 

 

 

Engineer (Steven)

Yes

100K

No

No

 

 

 

 

 

Sales (Debbie)

Yes

100K

Yes (M-F,

Yes

 

 

 

08:30~18:00)

 

 

 

 

 

 

Boss (Andy)

Yes

100K

Yes

Yes

 

 

 

 

 

Guest (guest)

Yes

50K

No

No

 

 

 

 

 

Others

No

---

No

No

 

 

 

 

 

The users are authenticated by an external RADIUS server at 192.168.1.200.

First, set up the user accounts and user groups in the ZyWALL. Then, set up user authentication using the RADIUS server. Finally, set up the policies in the table above.

The ZyWALL has its default settings.

140

 

ZyWALL USG 1000 User’s Guide