Chapter 44 Service Control
Table 206 System > WWW (continued)
LABEL | DESCRIPTION |
Client | Select a method the HTTPS or HTTP server uses to authenticate a client. |
Authentication | You must have configured the authentication methods in the Auth. method screen. |
Method |
|
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
44.4 Service Control Rules
Click Add or Edit in the Service Control table in a WWW, SSH, Telnet, FTP or SNMP screen to add a service control rule.
Figure 429 System > Service Control Rule Edit
The following table describes the labels in this screen.
Table 207 Edit Service Control Rule
LABEL | DESCRIPTION |
Address Object | Select ALL to allow or deny any computer to communicate with the ZyWALL using |
| this service. |
| Select a predefined address object to just allow or deny the computer with the IP |
| address that you specified to access the ZyWALL using this service. |
|
|
Zone | Select ALL to allow or prevent any ZyWALL zones from being accessed using this |
| service. |
| Select a predefined ZyWALL zone on which a incoming service is allowed or |
| denied. |
|
|
Action | Select Accept to allow the user to access the ZyWALL from the specified |
| computers. |
| Select Deny to block the user’s access to the ZyWALL from the specified |
| computers. |
|
|
OK | Click OK to save your customized settings and exit this screen. |
|
|
Cancel | Click Cancel to exit this screen without saving |
|
|
44.5 HTTPS Example
If you haven’t changed the default HTTPS port on the ZyWALL, then in your browser enter “https://ZyWALL IP Address/” as the web site address where “ZyWALL IP Address” is the IP address or domain name of the ZyWALL you wish to access.
592 |
| |
ZyWALL USG 1000 User’s Guide |
| |
|
|
|