ZyXEL Communications ZyWALL 1000 7.2 VPN Status

Chapter 7 Status

Table 34 Status (continued)

LABEL	DESCRIPTION
HA Status	This field displays the status of the interface in the virtual router.
	Active - This interface is the master interface in the virtual router.
	Stand-By- This interface is a backup interface in the virtual router.
	Fault - This VRRP group is not functioning in the virtual router right now. For
	example, this might happen if the interface is down.
	n/a - Device HA is not active on the interface.
Zone	This field displays the zone to which the interface is currently assigned.
IP Address	This field displays the current IP address assigned to the interface. If the IP
	address is 0.0.0.0, the interface is disabled or did not receive an IP address and
	subnet mask via DHCP.
	If this interface is a member of an active virtual router, this field displays the IP
	address it is currently using. This is either the static IP address of the interface (if it
	is the master) or the management IP address (if it is a backup).
Renew/Dial	Use this field to get or to update the IP address for the interface. Click Renew to
	send a new DHCP request to a DHCP server. Click the Connect icon to try to
	connect the auxiliary interface or a PPPoE/PPTP interface. If the interface cannot
	use one of these ways to get or to update its IP address, this field displays n/a.
Top 5 Intrusion &	The following is a list of the five intrusions or viruses that the ZyWALL has most
Virus Detection	frequently detected since it last started up.
Rank	This is the ranking number of an intrusion or virus. This is an intrusion’s or virus’s
	place in the list of most common intrusions or viruses.
Intrusion	This is the name of a signature for which the ZyWALL has detected matching
Detected	packets. The number in brackets indicates how many times the signature has been
	matched.
	Click the hyperlink for more detailed information on the intrusion.
Virus Detected	This is the name of the virus that the ZyWALL has detected.
Refresh Interval	Select how often you want the screen to automatically refresh.
Refresh Now	Click this to update the screen immediately.

7.2 VPN Status

Use this screen to look at the VPN tunnels that are currently established. To access this screen, click VPN Status in the Status screen.

160
	ZyWALL USG 1000 User’s Guide