ZyXEL Communications ZyWALL 1000 26.3Configuring the Default L2TP VPN Connection Example

Chapter 26 L2TP VPN Example

26.3Configuring the Default L2TP VPN Connection Example

1Click VPN > Network > IPSec VPN to open the screen that lists the VPN connections. Click the Default_L2TP_VPN_Connection’s Edit icon.

Figure 244 VPN > IPSec VPN > VPN Connection > Edit

2Enforce and configure the local and remote policies.

•For the Local Policy, create an address object that uses host type and contains the My Address IP address that you configured in the Default_L2TP_VPN_GW. The address object in this example uses IP address 172.23.37.205 and is named L2TP_IFACE.

•For the Remote Policy, create an address object that uses host type and an IP address of 0.0.0.0. It is named L2TP_HOST in this example.

3Click the Default_L2TP_VPN_Connection entry’s Enable icon and click Apply to turn on the entry.

	353
ZyWALL USG 1000 User’s Guide