|
| Chapter 4 Wizard Setup |
| Table 11 PPTP Encapsulation: Auto (continued) | |
| LABEL | DESCRIPTION |
| Connection ID | Enter the connection ID or connection name in this field. It must follow the "c:id" |
|
| and "n:name" format. For example, C:12 or N:My ISP. |
|
| This field is optional and depends on the requirements of your DSL modem. |
|
| You can use alphanumeric and |
|
| long. |
| WAN IP Address |
|
| Assignments |
|
|
|
|
| WAN Interface | This displays the identity of the interface you configure to connect with your ISP. |
|
|
|
| Zone | This field displays to which security zone this interface and Internet connection |
|
| will belong. |
|
|
|
| IP Address | Enter your WAN IP address in this field. |
|
|
|
| DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice | |
| versa. The DNS server is extremely important because without it, you must know the IP address of a | |
| computer before you can access it. The ZyWALL uses a system DNS server (in the order you specify | |
| here) to resolve domain names for VPN, DDNS and the time server. | |
|
|
|
| First DNS Server | Enter the DNS server's IP address(es) in the field(s) to the right. |
| Second DNS | Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do |
| Server | not configure a DNS server, you must know the IP address of a machine in order |
|
| to access it. |
|
|
|
| Next | Click Next to continue. |
|
|
|
The ZyWALL applies the configuration settings.
Figure 25 PPTP Encapsulation: Auto: Finish
You have set up your ZyWALL to access the Internet.
| 87 |
ZyWALL USG 1000 User’s Guide | |
|
|