Chapter 20 IPSec VPN

Table 92 VPN > IPSec VPN > VPN Connection > Manual Key > Edit (continued)

LABEL

DESCRIPTION

Authentication

Enter the authentication key, which depends on the authentication algorithm.

Key

MD5 - type a unique key 16-20 characters long

 

 

SHA1 - type a unique key 20 characters long

 

You can use any alphanumeric characters or ,;`~!@#$%^&*()_+\{}':./<>=-". If you

 

want to enter the key in hexadecimal, type “0x” at the beginning of the key. For

 

example, "0x0123456789ABCDEF" is in hexadecimal format; in

 

“0123456789ABCDEF” is in ASCII format. If you use hexadecimal, you must enter

 

twice as many characters as listed above.

 

The remote IPSec router must have the same authentication key.

 

The ZyWALL ignores any characters above the minimum number of characters

 

required by the algorithm. For example, if you enter 12345678901234567890

 

for a MD5 authentication key, the ZyWALL only uses 1234567890123456.

 

The ZyWALL still stores the longer key.

Policy

You can set up overlapping local policies or overlapping remote policies in the

 

ZyWALL.

 

 

Local Policy

Select the address or address group corresponding to the local network. Select

 

Create Object to configure a new one.

 

 

Remote Policy

Select the address or address group corresponding to the remote network. Select

 

Create Object to configure a new one.

 

 

Property

 

 

 

My Address

Type the IP address of the ZyWALL in the IPSec SA. 0.0.0.0 is invalid.

 

 

Secure

Type the IP address of the remote IPSec router in the IPSec SA.

Gateway

 

Address

 

 

 

Enable

Select this check box if you want the ZyWALL to send NetBIOS (Network Basic

NetBIOS

Input/Output System) packets through the IPSec SA.

broadcast

NetBIOS packets are TCP or UDP packets that enable a computer to connect to

over IPSec

and communicate with a LAN. It may sometimes be necessary to allow NetBIOS

 

 

packets to pass through IPSec SAs in order to allow local computers to find

 

computers on the remote network and vice versa.

 

 

Advanced/Basic

Click this button to show or hide the Inbound/Outbound traffic NAT fields.

 

 

Inbound/

Click the Advanced or Basic button to show or hide this section.

Outbound traffic

 

NAT

 

 

 

Outbound Traffic

 

 

 

Source NAT

This translation hides the source address of computers in the local network. It may

 

also be necessary if you want the ZyWALL to route packets from computers

 

outside the local network through the IPSec SA.

 

 

Source

Select the address object that represents the original source address (or select

 

Create Object to configure a new one). This is the address object for the

 

computer or network outside the local network. The size of the original source

 

address range (Source) must be equal to the size of the translated source

 

address range (SNAT).

 

 

Destination

Select the address object that represents the original destination address (or

 

select Create Object to configure a new one). This is the address object for the

 

remote network.

 

 

SNAT

Select the address object that represents the translated source address (or select

 

Create Object to configure a new one). This is the address object for the local

 

network. The size of the original source address range (Source) must be equal to

 

the size of the translated source address range (SNAT).

 

 

Inbound Traffic

 

 

 

 

305

ZyWALL USG 1000 User’s Guide