Chapter 45 File Manager

Figure 462 Firmware Upload In Process

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 463 Network Temporarily Disconnected

After five minutes, log in again and check your new firmware version in the HOME screen.

If the upload was not successful, the following message appears in the status bar at the bottom of the screen.

Figure 464 Firmware Upload Error

45.4 Shell Script Screen

Use shell script files to have the ZyWALL use commands that you specify. Use a text editor to create the shell script files. They must use a “.zysh” filename extension.

Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the Shell Script screen to store, name, download, upload and run shell script files. You can store multiple shell script files on the ZyWALL at the same time.

"You should include write commands in your scripts. If you do not use the write command, the changes will be lost when the ZyWALL restarts. You could multiple write commands in a long script.

622

 

ZyWALL USG 1000 User’s Guide