Chapter 44 Service Control
Table 209 System > Telnet (continued)
LABEL | DESCRIPTION |
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
44.9 Configuring FTP
You can upload and download the ZyWALL’s firmware and configuration files using FTP. To use this feature, your computer must have an FTP client. Please see Chapter 45 on page 615 for more information about firmware and configuration files.
To change your ZyWALL’s FTP settings, click System > FTP tab. The screen appears as shown. Use this screen to specify from which zones FTP can be used to access the ZyWALL. You can also specify from which IP addresses the access can come.
Figure 452 System > FTP
The following table describes the labels in this screen.
Table 210 System > FTP
LABEL | DESCRIPTION |
Enable | Select the check box to allow or disallow the computer with the IP address that |
| matches the IP address(es) in the Service Control table to access the ZyWALL |
| using this service. |
|
|
TLS required | Select the check box to use FTP over TLS (Transport Layer Security) to encrypt |
| communication. |
| This implements TLS as a security mechanism to secure FTP clients and/or |
| servers. |
|
|
Server Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
|
|
Server | Select the certificate whose corresponding private key is to be used to identify the |
Certificate | ZyWALL for FTP connections. You must have certificates already configured in the |
| My Certificates screen (Click My Certificates and see Chapter 40 on page 545 for |
| details). |
|
|
Service Control | This specifies from which computers you can access which ZyWALL zones. |
|
|
# | This the index number of the service control rule. |
|
|
Zone | This is the zone on the ZyWALL the user is allowed or denied to access. |
|
|
| 605 |
ZyWALL USG 1000 User’s Guide | |
|
|