ZyXEL Communications ZyWALL 1000 6.1.3 WAN Trunk

Chapter 6 Tutorials

Figure 51 Status > Interface Status Summary, After Ethernet Interface Edits

6.1.3 WAN Trunk

This example sets up trunk WAN_TRUNK with ge3 and ge4. This example uses the default settings for the trunk and shows how to add the interfaces to it.

Table 31 Trunk Example

ETHERNET TRUNK

INTERFACE

ge1---

ge3WAN_TRUNK

ge4WAN_TRUNK

ge5---

There are no existing trunks at the beginning of this example.

1Click Network > Interface > Trunk. The following screen appears.

Figure 52 Network > Interface > Trunk, Initial

2Click the Edit icon. The following screen appears.

Figure 53 Network > Interface > Trunk > Edit, Initial

3Click the Member icon, as shown above. Select the ge2 and click the left arrow to remove it from the member list. Do the same for aux. Select ge4 and click the right arrow to add it to the member list. Then click OK.

	129
ZyWALL USG 1000 User’s Guide