Chapter 4 Wizard Setup

Figure 22 PPPoE Encapsulation: Static

The following table describes the labels in this screen.

Table 10 PPPoE Encapsulation: Static

LABEL

DESCRIPTION

ISP Parameters

 

 

 

Encapsulation

This displays the type of Internet connection you are configuring.

 

 

Service Name

Type the PPPoE service name given to you by your ISP. PPPoE uses a service

 

name to identify and reach the PPPoE server. You can use alphanumeric and -

 

_@$./ characters, and it can be up to 64 characters long.

User Name

Type the user name given to you by your ISP. You can use alphanumeric and -

 

_@$./ characters, and it can be up to 31 characters long.

Password

Type the password associated with the user name above. Use up to 64 ASCII

 

characters except the [] and ?. This field can be blank.

 

 

Retype to

Type your password again for confirmation.

Confirm

 

 

 

Nailed-Up

Select Nailed-Upif you do not want the connection to time out.

 

 

Idle Timeout

Type the time in seconds that elapses before the router automatically disconnects

 

from the PPPoE server. The default time is 100 seconds.

 

 

WAN IP Address

 

Assignments

 

 

 

WAN Interface

This displays the identity of the interface you configure to connect with your ISP.

 

 

Zone

This field displays to which security zone this interface and Internet connection will

 

belong.

 

 

IP Address

Enter your WAN IP address in this field.

 

 

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. The ZyWALL uses a system DNS server (in the order you specify here) to resolve domain names for VPN, DDNS and the time server.

 

83

ZyWALL USG 1000 User’s Guide