Chapter 10 Interface
Figure 129 Network > Interface > Port Grouping
Each section in this screen is described below.
Table 51 Network > Interface > Port Grouping
LABEL | DESCRIPTION |
Representative | These are Ethernet interfaces. To add a physical port to a representative |
Interface (ge1, ge2, | interface, drag the physical port onto the corresponding representative |
ge3, ge4, ge5) | interface. |
|
|
Physical Port (1, 2, | These are the physical ports as they appear on the front panel of the ZyWALL. |
3, 4, 5) | To add a physical port to a representative interface, drag the physical port onto |
| the corresponding representative interface. |
|
|
Apply | Click this button to save your changes and apply them to the ZyWALL. |
|
|
Reset | Click this button to change the port groups to their current configuration (last- |
| saved values). |
|
|
10.4 VLAN Interfaces
This section introduces VLAN and VLAN interfaces and then explains the screens for VLAN interfaces.
10.4.1 VLAN Overview
A Virtual Local Area Network (VLAN) divides a physical network into multiple logical networks. The standard is defined in IEEE 802.1q.
196 |
| |
ZyWALL USG 1000 User’s Guide |
| |
|
|
|