ZyXEL Communications ZyWALL 1000 47.2 Session Screen

Chapter 47 Reports

Table 225 Maintenance > Report > Traffic (continued)

LABEL	DESCRIPTION
Web Site	This field displays the domain names most often visited. The ZyWALL counts each
	page viewed on a Web site as another hit. The maximum number of domain names
	in this report is indicated in Table 226 on page 640.
Hits	This field displays how many hits the Web site received. The ZyWALL counts hits
	by counting HTTP GET packets. Many Web sites have HTTP GET references to
	other Web sites, and the ZyWALL counts these as hits too. The count starts over at
	zero if the number of hits passes the hit count limit. See Table 226 on page 640.

The following table displays the maximum number of records shown in the report, the byte count limit, and the hit count limit.

Table 226 Maximum Values for Reports

LABEL	DESCRIPTION
Maximum	20
Number of
Records
Byte Count Limit	264 bytes; this is just less than 17 million terabytes.
Hit Count Limit	264 hits; this is over 1.8 x 1019 hits.

47.2 Session Screen

The Session screen displays information about active sessions for debugging or statistical analysis. It is not possible to manage sessions in this screen. The following information is displayed.

•User who started the session

•Protocol or service port used

•Source address

•Destination address

•Number of bytes received (so far)

•Number of bytes transmitted (so far)

•Duration (so far)

You can look at all the active sessions by user or by service, or you can filter the information by user, protocol / service or service group, source address, and/or destination address and view it by user.

To access this screen, login to the web configurator. When the main screen appears, click Maintenance > Report > Session. The following screen appears.

640
	ZyWALL USG 1000 User’s Guide