4
Wizard Setup
This chapter provides information on configuring the Wizard setup screens in the web configurator. See the
4.1Wizard Setup Overview
"Use the wizards only for initial configuration starting from the default configuration.
The web configurator's setup wizards help you configure Internet and VPN connection settings.
"Changes you make in an installation or VPN wizard may not be applied if you have already changed the ZyWALL’s configuration.
In the ZyWALL web configurator, click the Wizard icon to open the Wizard Setup Welcome screen. The following summarizes the wizards you can select:
•INSTALLATION SETUP, ONE ISP
Click this link to open a wizard to set up a single Internet connection for Gigabit Ethernet port 2. This wizard creates matching ISP account settings in the ZyWALL if you use PPPoE or PPTP. See Section 4.2 on page 76.
•INSTALLATION SETUP, TWO ISP
Click this link to open a wizard to set up Internet connections for Gigabit Ethernet (ge) interfaces 2 and 3. See Section 4.5 on page 93. You can connect one interface to one ISP (or network) and connect the other to a second ISP (or network). You can use the second WAN connection for load balancing to increase overall network throughput or as a backup to enhance network reliability (see Section 11.3 on page 219 for more on load balancing).
This wizard creates matching ISP account settings in the ZyWALL if you use PPPoE or PPTP. This wizard also creates a WAN trunk.
•VPN SETUP
| 75 |
ZyWALL USG 1000 User’s Guide | |
|
|