Chapter 44 Service Control

Figure 455 System > Dial-in Mgmt

The following table describes the labels in this screen.

Table 213 System > Dial-in Mgmt

LABEL

DESCRIPTION

Enable

Select this check box to turn on dial-in management.

 

 

Description

Enter some information about this connection.

 

 

Mute

Select this check box to stop the external serial modem from making audible

 

sounds during a dial-in management session.

 

 

Answer Rings

Set how many times the ZyWALL lets the incoming dial-in management session

 

ring before processing it.

 

 

Port Speed

Use the drop-down list box to select the speed of the connection between the

 

ZyWALL’s auxiliary port and the external modem. Available speeds are: 9600,

 

19200, 38400, 57600, or 115200 bps.

Initial String

Type the AT command string that the ZyWALL returns to the external serial

 

modem connected to the ZyWALL’s auxiliary port during connection initialization.

 

Note: Consult the manual of your external serial modem

 

connected to your ZyWALL’s auxiliary port for specific AT

 

commands.

 

 

Advanced/Basic

Click Advanced to display more configuration fields and edit the details of your

 

dial-in management setup.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

44.13 Vantage CNM

Vantage CNM (Centralized Network Management) is a browser-based global management solution that allows an administrator from any location to easily configure, manage, monitor and troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for details.

If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not do any configurations directly to the ZyWALL (using either the web configurator or commands) without notifying the Vantage CNM administrator.

610

 

ZyWALL USG 1000 User’s Guide