Chapter 6 Tutorials

Figure 46 Status: Interface Status Summary After Port Grouping

6.1.2 Set up Ethernet Interfaces

This example sets up the Ethernet interfaces as shown below.

Table 30 Ethernet Interfaces Example

ETHERNET INTERFACE

SETTINGS

ge1

192.168.1.1/24, DHCP server

 

 

ge3

DHCP client

 

 

ge4

172.23.37.240/24

 

 

ge5

10.0.0.1/24, DHCP server

 

 

You have decided to use the default settings for ge1 and ge3, so it is not necessary to edit these interfaces. You can also skip ge2 because there are no physical ports associated with it anymore. Therefore, the following steps set up ge4 and ge5.

1Click Network > Interface > Ethernet. The following screen appears.

Figure 47 Network > Interface > Ethernet, Initial

2Click the Edit icon for ge4, as shown above, and set up the IP address as shown below.

 

127

ZyWALL USG 1000 User’s Guide