ZyXEL Communications ZyWALL 1000 27.11 Application Patrol Statistics, 27.11.1 Application Patrol Statistics: General Setup

		Chapter 27 Application Patrol
	Table 117 AppPatrol > Other > Edit (continued)
	LABEL	DESCRIPTION
	Priority	Enter a number between 1 and 7 to set the priority for traffic that matches this
		policy. The smaller the number, the higher the priority.
		Traffic with a higher priority is given bandwidth before traffic with a lower priority.
		The ZyWALL uses a fairness-based (round-robin) scheduler to divide bandwidth
		between traffic flows with the same priority.
		The number in this field is ignored if the incoming and outgoing limits are both set to
		0. In this case the traffic is automatically treated as being set to the lowest priority
		(7) regardless of this field’s configuration.

	Maximize	Enable maximize bandwidth usage to let the traffic matching this policy “borrow”
	Bandwidth	any unused bandwidth on the out-going interface.
	Usage	After each application or type of traffic gets its configured bandwidth rate, the
		ZyWALL uses the fairness- based scheduler to divide any unused bandwidth on
		the out-going interface amongst applications and traffic types that need more
		bandwidth and have maximize bandwidth usage enabled.

	Log	This field controls what kind of record the ZyWALL creates when traffic matches
		this policy. Please see Chapter 46 on page 625 for more information.
		no - the ZyWALL does not record anything
		log - the ZyWALL creates a record in the log
		log alert - the ZyWALL creates an alert

	OK	Click OK to save your changes back to the ZyWALL.

	Cancel	Click Cancel to exit this screen without saving your changes.

This screen displays a bandwidth usage graph and statistics for selected protocols. Click AppPatrol > Statistics to open the following screen.

Use the top of the AppPatrol > Statistics screen to configure what to display.

Figure 310 AppPatrol > Statistics: General Setup