Chapter 45 File Manager

Table 216 Maintenance > File Manager > Configuration File (continued)

LABEL

DESCRIPTION

#

This column displays the number for each configuration file entry. The total number of

 

configuration files that you can save depends on the sizes of the configuration files and

 

the available flash storage space.

 

 

File Name

This column displays the label that identifies a configuration file.

 

You cannot delete the following configuration files or change their file names.

 

The system-default.conffile contains the ZyWALL’s default settings. Select this file

 

and click Apply to reset all of the ZyWALL settings to the factory defaults. This

 

configuration file is included when you upload a firmware package.

 

The startup-config.conffile is the configuration file that the ZyWALL is currently

 

using. If you make and save changes during your management session, the changes

 

are applied to this configuration file.

 

The lastgood.conf is the most recently used (valid) configuration file that was saved

 

when the device last restarted.

 

 

Size

This column displays the size (in KB) of a configuration file.

 

 

Last Modified

This column displays the date and time that the individual configuration files were last

 

changed or saved.

 

 

Upload

The bottom part of the screen allows you to upload a new or previously saved

Configuration

configuration file from your computer to your ZyWALL

File

You cannot upload a configuration file named system-default.confor lastgood.conf.

 

If you upload startup-config.conf, it will replace the current configuration and

 

immediately apply the new settings.

 

 

File Path

Type in the location of the file you want to upload in this field or click Browse ... to find

 

it.

 

 

Browse...

Click Browse... to find the .conf file you want to upload. The configuration file must use

 

a “.conf” filename extension. You will receive an error message if you try to upload a fie

 

of a different format. Remember that you must decompress compressed (.zip) files

 

before you can upload them.

 

 

Upload

Click Upload to begin the upload process. This process may take up to two minutes.

 

 

45.3 Firmware Package Screen

Click Maintenance > File Manager > Firmware Package to open the Firmware Package screen. Use the Firmware Package screen to check your current firmware version and upload firmware to the ZyWALL.

"The web configurator is the recommended method for uploading firmware. You only need to use the command line interface if you need to recover the firmware. See the CLI Reference Guide for how to determine if you need to recover the firmware and how to recover it.

Find the firmware package at www.zyxel.com in a file that (usually) uses the system model name with a .bin extension, for example, “zywall.bin”.

620

 

ZyWALL USG 1000 User’s Guide