Chapter 21 SSL VPN
Figure 215 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Table 104 VPN > SSL VPN > Global Setting
LABEL | DESCRIPTION |
Global Setting |
|
|
|
Network | Specify the IP address of the ZyWALL (or a gateway device) for full tunnel mode |
Extension IP | SSL VPN access. |
Address | Leave this field to the default settings unless it conflicts with another interface. |
|
|
Message |
|
|
|
Login Message | Specify a message to display on the screen when a user logs in and an SSL VPN |
| connection is established successfully. You can enter up to 31 characters |
| |
|
|
Logout Message | Specify a message to display on the screen when a user logs out and the SSL |
| VPN connection is terminated successfully. You can enter up to 31 characters (“a- |
| z”, |
|
|
Update Client | You can upload a graphic logo to be displayed on the web browser on the remote |
Virtual Desktop | user computer. The ZyXEL company logo is the default logo. |
Logo | Specify the location and file name of the logo graphic or click Browse to locate it. |
| Note: The logo graphic must be GIF, JPG, or PNG format. The |
| graphic should use a resolution of 127 x 57 pixels to avoid |
| distortion when displayed. The ZyWALL automatically |
| resizes a graphic of a different resolution to 127 x 57 pixels. |
| The file size must be 100 kilobytes or less. Transparent |
| background is recommended. |
|
|
Browse | Click Browse to locate the graphic file on your computer. |
|
|
Upload | Click Upload to transfer the specified graphic file from your computer to the |
| ZyWALL. |
|
|
Reset Logo to | Click Reset Logo to Default to display the ZyXEL company logo on the remote |
Default | user’s web browser. |
|
|
Apply | Click Apply to save the changes and/or start the logo file upload process. |
|
|
Reset | Click Reset to start configuring this screen again. |
|
|
328 |
| |
ZyWALL USG 1000 User’s Guide |
| |
|
|
|