Chapter 12 Policy and Static Routes

Figure 150 Network > Routing > Policy Route > Edit

The following table describes the labels in this screen.

Table 67 Network > Routing > Policy Route > Edit

LABEL

DESCRIPTION

Configuration

 

 

 

Enable

Select this to activate the policy.

 

 

Description

Enter a descriptive name of up to 31 printable ASCII characters for the policy.

 

 

Criteria

 

 

 

User

Select a user name or user group from which the packets are sent. Select Create

 

Object to configure a new user account (see Section 34.2.1 on page 506 for

 

details).

 

 

Incoming

Click Change... to select an interface or VPN tunnel through which the incoming

Interface

packets are received.

 

 

Source Address

Select a source IP address object or select Create Object to configure a new one.

 

 

Destination

Select a destination IP address object or select Create Object to configure a new

Address

one.

 

 

Schedule

Select a schedule or select Create Object to configure a new one (see Chapter 37

 

on page 527 for details). none means the route is active at all times if enabled.

 

 

Service

Select a service or service group from the drop-down list box. Select Create

 

Object to add a new service. See Section 36.2.1 on page 523 for more

 

information.

 

 

Next-Hop

 

 

 

230

 

ZyWALL USG 1000 User’s Guide