Chapter 4 Wizard Setup

Name: Type the name used to identify this VPN connection (and VPN gateway). You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive.

Secure Gateway: Enter the WAN IP address or domain name of the remote IPSec router (secure gateway). Use 0.0.0.0 if the remote IPSec router has a dynamic WAN IP address and no domain name.

Pre-Shared Key: Type the password. Both ends of the VPN tunnel must use the same password. Use 8 to 31 case-sensitive ASCII characters or 16 to 62 hexadecimal (“0-9”, “A-F”) characters. Proceed hexadecimal characters with “0x”.

Figure 35 VPN Express Wizard: Step 3

The following table describes the labels in this screen.

Table 16 VPN Express Wizard: Step 3

LABEL

DESCRIPTION

Local Policy

Type a static local IP address that corresponds to the remote IPSec router's

(IP/Mask)

configured remote IP address (the remote IP address of the other ZyWALL).

 

To specify IP addresses on a network by their subnet mask, type the subnet mask of

 

the LAN behind your ZyWALL.

 

 

Remote Policy

Type a static local IP address that corresponds to the remote IPSec router's

(IP/Mask)

configured local IP address (the local IP address of the other ZyWALL).

 

To specify IP addresses on a network by their subnet mask, type the subnet mask of

 

the LAN behind the remote gateway.

 

 

Next

Click Next to continue.

 

 

98

 

ZyWALL USG 1000 User’s Guide