Chapter 21 SSL VPN
21.5.1 Uploading a Custom Logo
Follow the steps below to upload a custom logo on the ZyWALL.
1Click VPN > SSL VPN and click the Global Setting tab to display the configuration screen.
2Click Browse to locate the logo graphic. Make sure the file is in GIF format.
3Click Apply to start the file transfer process.
4Log in as a user to verify that the new logo displays properly.
The following shows an example logo on the remote user screen.
Figure 216 Example Logo Graphic Display
21.6 Establishing an SSL VPN Connection
Follow the steps below to establish an SSL VPN connection.
1Display the login screen and enter your user account information (the user name and password).
2Select Login to SSL VPN.
3Click Login.
4SSL VPN connection starts. This may take several minutes depending on your network connection. Once the connection is up, you should see the client portal screen. The following shows an example.
| 329 |
ZyWALL USG 1000 User’s Guide | |
|
|