ZyXEL Communications ZyWALL 1000 14.3 Zone Add/Edit

Chapter 14 Zones

14.3 Zone Add/Edit

The Zone Add/Edit screen allows you to define a zone or edit an existing one. To access this screen, go to the Zone screen (see Section 14.2 on page 246), and click either the Add icon or an Edit icon.

Figure 162 Network > Zone > Edit

The following table describes the labels in this screen.

Table 76 Network > Zone > Edit

LABEL	DESCRIPTION
Name	Type the name used to refer to the zone. You may use 1-31 alphanumeric
	characters, underscores(_), or dashes (-), but the first character cannot be a
	number. This value is case-sensitive.
Block Intra-zone	Select this check box to block network traffic between members in the zone.
Traffic
Member List	Available lists the interfaces that do not belong to any zone. The word in front of
	the name indicates whether this member is an interface or a VPN tunnel.
	IFACE - this member is an interface.
	IPSEC - this member is a VPN tunnel.
	Select any interfaces that you want to add to the zone you are editing, and click the
	right arrow button to add them.
	Member lists the interfaces that belong to the zone. Select any interfaces that you
	want to remove from the zone, and click the left arrow button to remove them.

	247
ZyWALL USG 1000 User’s Guide